RODE STEREO VIDEOMIC PRO Rycote Stereo On Camera Microphone | Vbizz
  • No products found.
Store
Our Project
Speaker
Audio Mixer
Microphone
JBL
Shure
Sennheiser
Minkez
image9433

RODE STEREO VIDEOMIC PRO Rycote Stereo On Camera Microphone

0 Reviews
The RØDE's STEREO VIDEOMIC PRO rycote stereo on camera microphone capturing powerful sound and delivers broadcast-quality audio, ideal for recording loud sound sources, such as live music, motorsport, or interviews.
RM1,031.00
Availability: Sold Out
WhatsApp for Enquiry
ASK THE EXPERT
Our expertly trained Sales Representatives are ready to help!
WhatsApp: +60138118613

The RØDE's STEREO VIDEOMIC PRO is a high-resolution stereo on-camera condenser microphone that allows filmmakers to capture realistic ambient sounds from a range of sources. It has improved on the popularity of the Stereo VideoMic Pro by adding a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, a denser foam windshield, greater RF shielding, and a thicker Kevlar braided cable to the mix. The Rycote Lyre's integrated shockmount system reduces handling noise. The Stereo VideoMic has a 75 Hz high-pass filter switch to reduce low-frequency noise, as well as a -10 dB pad to increase headroom for capturing powerful signals without distortion. The +20 dB level-boost switch was created specifically for DSLR cameras to deliver a higher-quality feed. 

  • Broadcast-recording-quality on-camera microphone
  • Matched pair, 1/2" condenser capsules in X/Y stereo configuration
  • Ultra-lightweight, compact form factor
  • Two-step high-pass filter (flat, 75 Hz)
  • Three-position level control (-10, 0, +20 dB)
  • 9V-battery-powered - over 100 hours of use (alkaline)
  • Integrated Rycote Lyre shockmount
  • Denser foam windscreen
  • 1/8" (3.5mm) stereo mini-jack output
  • Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
Polar Pattern :
XY Cardioid
Frequency Range :
40 Hz to 20 kHz (selectable HPF @ 75 Hz)
Sensitivity :
-38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz
Output Impedance :
200 Ohms
Maximum Output :
+4.2 dBu (@ 1% THD into 1 kOhms)
Dynamic Range :
100 dB
Maximum SPL :
134 dB, max (1 kHz, 1% THD into 1 kOhms load)
Signal / Noise :
76 dBA (A-weighted per IED651)
Power Supply :
9 V alkaline battery
Connection :
1/8" (3.5 mm) stereo mini-jack
Signal to Noise Ratio :
76 dBA SPL (A-weighted per IEC651)
Dimensions (D x W x H) :
115 x 80 x 134 mm
Weight (kg) :
116 g (without battery)