FBT MITUS 210MA 10" 1200W Powered Floor Monitor Speaker
The FBT MITUS 210MA bi-amplified powered speaker is made of 0.59" birch plywood; the front is protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers, and the cabinet exterior is protected by a rugged touring grade scratch resistant black paint finish.
The FBT MITUS 210MA is a two-way coaxial design with 2x 10" B&C unique neodymium magnet coaxial speakers with 2.5" voice coils, a class D built-in amplifier with 600W RMS to the LF and 300W RMS to the HF, and a switch mode power supply.
The FBT MITUS 210MA features an 8-selectable preset DSP with A/D-D/A low noise converters.
The FBT MITUS 210MA must meet the following requirements: 60Hz to 20kHz frequency response, 132dB maximum SPL, 8 Ohm LF / 8 Ohm HF nominal impedance XLR «in&link», volume, preset, HP filter, and GND raise switch are all available on the control panel.
The FBT MITUS 210MA can be mounted on a speaker stand using a standard 1.38" speaker stand socket.
KEY FEATURES
- 2-way bi-amplified, bass-reflex design with coaxial driver
- 2 x 250 mm (2 x 10’’) B&C custom neodymium magnet speakers with 64 mm (2.5’’) voice coil, one of them is coaxial with 36 mm (1.4’’) exit titanium compression driver and 64 mm (2.5’’) voice coil
- Frequency response from 60Hz to 20KHz
- Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF with switch mode power supply
- DSP with 8 eq presets
- Control panel with XLR input and link, volume, presets, HP-filter, ground-lift
- 70° conical dispersion
- 15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish
- 35 mm (1.38’’) stand socket and back side carrying handle
- Ideal for live sound stage monitoring applications, as well as a front of house main PA speaker
- Very lightweight, only 19Kg