Rode NT5S Microphone

Small-diaphragm Single NT5 Cardioid Condenser Mic

RM950.00
SKU
NT5S
Rating:
100% of 100
WhatsApp for Price

Single Rode NTD Small Diaphragm Condenser Mic
The NT5 is a pencil-type, small-diaphragm, mono condenser mic that was originally offered in matched pairs featuring sequential serial numbers so that they're close to each other all the way through manufacturing. A typical use of the NT5 would be as drum overheads or recording high-hats. We've found that they are detailed and very clear, and with just a tiny bit of compression they sound great. If you prefer the positioning flexibility afforded by a pair of small-diaphragm mics, then the NT5 is an easy choice. If you're lookng for a great-sounding, and very affordable single small-diaphragm condenser mic, the Rode NT5-S is a single NT5. Small-diaphragm condenser mics such as the NT5-S have an even and wider frequency response than large diaphragm condensers, handle higher SPLs, and can more accurately capture instruments with a pronounced high-frequency component (violins, for instance).

Rode NT5-S Specifications:

  • Acoustic Principle: Externally polarised single diaphragm
  • condenser transducer.
  • Capsule Size: 0.5" (13mm).
  • Active Electronics: JFET Impedance converter with bipolar
  • output buffer.
  • Directional Response: Cardioid.
  • Frequency Response: 20Hz to 20kHz.
  • Sensitivity: -38 dB re 1v/Pa +/- 2 dB equivalent to 12mV/Pa
  • where 1 Pa = 94dBSPL.
  • Equivalent Noise: <16 dBSPL, (A-weighted per IEC268-15).
  • Maximum Output: +13.9 dBu @ 1% THD into 1k_
  • Dynamic Range: >128 dB.
  • Maximum SPL: 143 dB @ 1% THD into 1k_
  • Signal to Noise: 78dB.
  • Requires phantom power, +38V to +52 V
  • P24 Supply (20V-26V) The microphone operates in accordance with the above specifications to a minimum of 18V. (It will operate with some performance degradation below 18V.)
  • Packed Weight: 1.8kg (Mic only 100g).


Rode NT5 Features:

  • True condenser transducer
  • Gold sputtered 1/2" Capsules
  • Heavy duty satin-nickel-plated body
  • Low Noise
  • Full Frequency Response
  • Custom WS5 Wind Shield
  • Custom RM5 Stand Mount
  • Surface-mount transformerless circuitry
  • Requires phantom power


Tech Specs

More Information
Brand: Rode
Microphone Type: Condenser
Polar Pattern: Cardioid
Frequency Response: 20Hz-20kHz
Output Impedance: 100 ohms
Output Connector: XLR
Weight: 1kg
Manufacturer Part Number: NT5S
Country of Origin: Australia

Reviews 1

Write Your Own Review
You're reviewing:Rode NT5S Microphone
Your Rating