JBL Control 29AVWH1 8" 300W Passive Speaker

The JBL's CONTROL 29AVWH1 is a mid-sized indoor/outdoor loudspeaker with 40Hz-19khz frequency range, 300W continuous program power, and InvisiBall mounting system for simple install, and provides a high degree of theft deterrence.

Availability: Sold Out
Our expertly trained Sales Representatives are ready to help!
WhatsApp: +60138118613

The JBL's CONTROL 29AVWH1 is a shielded passive 8" loudspeaker with a low-saturation transformer for voice amplification and foreground music reproduction in a variety of indoor and outdoor venues. This public address system can be powered by 70V, 100V, or 8-Ohm power amplifiers with the 110W transformer (available separately). A sturdy 8" Kevlar-cone woofer and a 1" titanium-diaphragm compression driver are included in each Control 29AV-1, resulting in a frequency response of 43 Hz to 15 kHz and a continuous programme power output of 300W. The loudspeaker may be positioned horizontally or vertically with its rotating horn.

The built-in crossover network enables optimum frequency distribution and smooth tone to the speaker components. SonicGuard circuitry protects against overloading-related damage without sacrificing sound quality. The screw-down terminal strip allows for easy wiring and uses nickel/zinc terminals for increased rust resistance. Installation is made easier by the included InvisiBall mounting system and input panel cover. The Control 29AV-1 can be put as close as 9" from television monitors thanks to clever magnetic shielding.

  • Extended bandwidth, extremely smooth frequency response.
  • 110-degree x 85-degree HF coverage, rotatable horn.
  • 110-watt transformer for 70V or 100V lines, with 8 ohm thru.
  • SonicGuard overload protection.
  • 200 mm (8") Kevlar cone woofer, 25 mm (1") titanium diaphragm compression driver.
  • Includes InvisiBall mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
  • Sealed input panel cover and screw-down input terminals.
  • Frequency Range (-10 dB): 40Hz to 19kHz
  • Frequency Response (+/-3 dB): 45Hz to 18kHz
  • 100 Hr Power Capacity: 300 Watts Continuous Program Power
  • 150 Watts Continuous Pink Noise
  • Maximum SPL @ 1m: Short-Term: 120 dB; Long-Term: 114 dB
  • Nominal Sensitivity: 91 dB, 1W @ 1 m (3.3 ft)
  • Nominal Coverage Angle: 110-degree H x 85-degree V, rotatable
  • Directivity Factor (Q): 7.2, averaged 500Hz to 16kHz
  • Directivity Index (DI): 8.6dB, averaged 500Hz to 16kHz
  • Nominal Impedance: 8 ohms
  • Minimum Impedance: 6.3 ohms @ 230Hz
  • Crossover Type: 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
  • Transformer Taps: 70V: 110W, 55W, 28W & 14W; 100V: 110W, 55W, & 28W, Thru Position: 8 ohm nominal
Attr 100V High Impedance :
110 W/ 55 W/ 28 W
Attr 70V High Impedance :
110 W/ 55 W/ 28 W/ 14 W
Continuous Power :
Frequency Range :
40Hz-19KHz (-10dB)
Impedance :
8 Ohm
Manufacturer :
Maximum Peak SPL :
Model :
Height (cm) :
Length (cm) :
Width (cm) :