The JBL Commercial CSM14 offers fixed I/O, pre-configured architecture, control of multiple audio sources, simple front-panel configuration and control without the need for a computer, and compatibility with CSR series wall controllers.
Simplicity and ease of use and installation are the goal with the CSM14. Three of the four input channels will accept stereo RCA (summed to mono) or Euroblock style connections, while the fourth input channel is Euroblock only, with optional priority ducking. All input channels can be switched for line level or mic level sources, and phantom power may be switched on or off. Output connection is via one Euroblock connector, there is a switchable 70 Hz high pass filter available, and RJ45 connector for optional CSR-V remote volume control.
The CSM14 features a front panel design that is simple and clean. Master volume as well as individual level controls for each input are present, as are recessed treble and bass EQ controls. A power switch is featured on the front panel, and all control knobs have illuminated backlit rings to add an air of elegance to any installation.
|Line Output Level||5.0 V RMS into 10 kOhms|
|Frequency Response||20 to 20,000 Hz ±1 dB|
|Total Harmonic Distortion||0.05% typical|
|Signal to Noise Ratio||>90 dB|
|Input Impedance||Mic: 400 ohms |
Line: 20 kOhms
RCA: 50 kOhms
|Tone Controls||Bass: ±10 dB at 100 Hz |
Treble: ±10 dB at 10,000 Hz
|Input Sensitivity||Mic: 3 mV RMS |
Line: 300 mV RMS
RCA: 300 mV RMS
|Phantom Power||+27 VDC|
|Input/Output AC Line Voltage||100 to 240 V, 50/60 Hz|
|Operating Temperature / Humidity||32 to 104°F (0 to 40°C) 95% R.H. (non-condensing)|
|Storage Temperature||68 to 185°F (-20 to 85°C)|
|Dimensions||1.7 x 8.6 x 11.9" (43.3 x 218.5 x 303.4 mm)|
|Weight||4.3 lb (2.0 kg)|
|Package Weight||7.45 lb|
|Box Dimensions (LxWxH)||16.3 x 12.1 x 5.3"|