JBL Control 29AV 1 WH Monitor Speaker

JBL Control 29AV 1 WH


The JBL C29AV-1 Control 29 Monitor Speaker is designed to give you top quality sound whether you take the show indoors or out.

RM3,630.04


JBL Control 29AV 1 WH Monitor Speaker


The JBL C29AV-1 Control 29 Monitor Speaker is designed to give you top quality sound whether you take the show indoors or out. With this type of versatility, you also want to know that your sound quality is going to be impressive and JBL doesn't disappoint. The Control 29AV-1 gives you improved voicing for an extremely smooth, high fidelity performance. The flat frequency, extended bandwidth and well-controlled, defined coverage give your audience an even better experience.

The low insertion loss line distribution transformer enables you to use either 70V or 100V speaker lines. If you're interested in using multiple speakers in a loudspeaker line, switch to bypass position and take advantage of the 8 Ohm impedance. If you are using more than one speaker, or you just want to make the most of your stage, tip the speakers on their side and use them in a vertical position, just remember to rotate the high-frequency horn so you still get that great sound quality.

If you're going to mount your speakers the InvisiBall mounting system lets you position your speakers with a horizontal rotation of up to 41° off axis and a vertical rotation of 23 to 36°. The InvisiBall system is also very simple to install and provides a high degree of theft deterrence.


Incredible Sound Quality

The extremely smooth, flat frequency response with extended bandwidth gives your audience the best quality sound while the rotatable horn allows you to direct the audio at that sweet spot in the audience


InvisiBall Mounting System

For mounting applications the InvisiBall System works exceptionally well. It installs easily, gives you the reliable support you need while still allowing you the flexibility to adjust your speakers for just the right sound. Not to mention its theft deterrent qualities


SonicGuard

JBL's trademarked SonicGuard overload protection is inaudible to the listener but it ensures they hear a full fidelity sound throughout the entire performance


Weather Resistant

If you're a mobile musician and outdoor and indoor venues round out your schedule, then the Control 29AV-1 has you covered. JBL has maximized the weather resistant qualities of this speaker to include the Kevlar woofer, a pure butyl rubber surround and located the driver basket in the rear to minimize direct exposure

Features

  • - Extended bandwidth, extremely smooth frequency response.
  • - 110° x 85° HF coverage, rotatable horn.
  • - 110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
  • - SonicGuard™ overload protection.
  • - 200 mm (8 in) Kevlar cone woofer, 25 mm (1 in) titanium diaphragm compression driver.
  • - Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
  • - Sealed input panel cover and screwdown input terminals.


Specifications

Power Capacity300 W Continuous Program Power; 150 W Continuous Pink Noise
Transformer Taps70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W,
Thru Position: 8 ohms nominal
Frequency Response45 Hz – 18 kHz ( ± 3 dB)
Maximum SPL @ 1mShort-Term: 120 dB; Long-Term: 114 dB
Nominal Sensitivity90 dB (2.83V / 1m)
Nominal Coverage Angle110° H x 85° V, rotatable
Directivity Factor (Q)7.2 dB, averaged 500 Hz to 16 kHz
Directivity Index (DI)8.6 dB, averaged 500 Hz to 16 kHz
Nominal Impedance8 ohms
Minimum Impedance6.3 ohms @ 230 Hz
Crossover Network3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Low Frequency200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
High Frequency25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure MaterialHigh impact polystyrene
GrilleThermoset composite coated steel, WeatherMax multi-layer foam
Overload ProtectionFull-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
EnvironmentalIEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
TerminationsScrew-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency RatingTransformer is listed per UL1876
ColorsBlack or white (-WH)
Dimensions (H x W x D)520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net Weight (ea)12.2 kg (26.8 lb.)
Shipping Weight (ea)14.0 kg (30.8 lb.)
Included Accessories1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
Optional AccessoriesMTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket

Similar Products


RM440.00

Amperes FS338B Foreground Mus...


RM2,950.55

JBL Control 67 HCT Narrow 75 Degr...


RM440.00

Amperes FS340B Foreground Mus...


RM2,507.96

JBL Control 67 PT Extended Range ...


RM52.00

Amperes CS516 Ceiling Surface...


RM3,630.04

JBL Control 29AV 1 WH Monitor Spe...

See Also : PA Speaker 100V 70V, JBL
CONTACT US