JBL CBT 100LA LS Column Speaker

JBL CBT 100LA LS


Provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing

RM7,600.55


JBL CBT 100LA LS Column Speaker

The black CBT 100LA-LS Line-Array Column Loudspeaker from JBL contains 16 drivers (2” each) and features the Constant Beamwidth Technology which utilizes complex analog delay beam-forming and amplitude-tapering to achieve consistent vertical coverage, avoiding narrow vertical beaming and out-of-coverage lobing. The vertical pattern coverage is switchable between 40° for medium-throw coverage and 15° for long-throw applications. This EN54:24 certified loudspeaker comes with a built-in 70/100V transformer, plus 8 ohms direct capability.

Constant Beamwidth Technology provides constant directivity up to high frequencies and reduces out-of-coverage lobing
EN54:24-compliant (when installed with the included MTC-PC2 Panel Cover)
Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications
Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode
Dynamic SonicGuard overload protection
Swivel (pan)/tilt wall bracket included
Built-in 70/100V transformer, plus 8 ohms direct capability
MTC-PC2 Weatherproof Panel provides protection for the input connections of the loudspeaker

Frequency Range (-10 dB)

120 Hz – 20 kHz

Coverage Pattern

Vertical:
Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
Broad Mode: 40° (1 kHz - 16 kHz) (±10°)
Horizontal: 150° (ave, 1 kHz – 4 kHz, ±20°)

Sensitivity (2.83V@ 1m)

Narrow: (speech mode) 96 dB (2 kHz - 14 kHz )
             (music mode) 93 dB (300 Hz - 18 kHz)
Broad: (speech mode) 93 dB (2 kHz - 14 kHz)
             (music mode) 90 dB (300 Hz - 18 kHz)

EN54 Sensitivity (@ 4m)

76 dB (per EN54:24 spectrum and measurement conditions at 4 meters, set at broad/music mode.)

Nominal Impedance

8 ohms (in Thru mode)
15w@70v; 30w@100v Tap = 333Ω
30w@70v; 60w@100v Tap = 167Ω 
60w@70v; 120w@100v Tap = 83Ω 
120w@70v; N/C@100v Tap = 42Ω

Power Capacity
(8 ohm setting)

325 W (1300W peak), 2 hrs
200 W (800W peak), 100 hrs

Max SPL

Narrow: (speech mode) 121 dB cont ave (127 peak)
            (music mode) 118 dB cont ave (124 peak)
Broad: (speech mode) 118 dB cont ave (124 peak)
            (music mode) 115 dB cont ave (121 peak)

EN54 Max SPL (@ 4m)

92 dB (per EN54:24 spectrum and measurement conditions, at 4 meters)

70V/100V Transformer Taps

120W, 60W, 30W, (15W at 70V only), and 8 thru, via switch

Reference Axis

Specification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle.

Enclosure

Fiberglass reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors

Black or White (-WH)

Insert Points

18 M6 insert points on back panel.

Mounting

Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D)

1000 x 98.5 x 153 (39.4 in x 3.8 in x 6.0 in)

 

Similar Products


RM9,564.69

JBL CBT 70J 1 Column Speaker

RM409.00 RM389.00

TOA TZ406B 40W Column Speaker Sys...


RM4,020.12

JBL CBT 50LA LS Column Speaker


RM330.00

Amperes CH740 100V Line Colum...

RM279.00 RM265.00

TOA TZ206B 20W Column Speaker Sys...


RM290.00

Amperes CH730 30W 100V Column...

See Also : Column Speaker, JBL
CONTACT US