JBL CBT 100LA Column Speaker

JBL CBT 100LA


The white CBT 100LA-1 Line Array Column Loudspeaker from JBL utilizes complex analog delay beam-forming and amplitude tapering to accomplish superior.

RM 6,XXX


JBL CBT 100LA Column Speaker

The white CBT 100LA-1 Line Array Column Loudspeaker from JBL utilizes complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers.

The slim, compact design fits well into virtually any architectural decor. The 39.4" tall line array height provides consistent pattern control throughout the intelligibility band, making the CBT 100LA suitable for challenging acoustic environments. The combination of excellent sound quality, pattern control, and compact design makes CBT 100LA suitable for applications such as lecture halls, transit centers, conference rooms, cathedrals, multipurpose spaces, architectural spaces, and in-wall recessed locations.

The innovative coverage adjustability allows switching between broad and narrow vertical coverage settings to allow matching the coverage and throw requirements of the application. Coverage can be easily switched in-venue with the speaker already installed. This allows a single loudspeaker model to perform in a wide variety of project types.

The voicing can be set to match the application through the Music/Speech switch. The Music setting provides flat frequency response, while the Speech setting produces a mid-range presence boost to provide clear, intelligible speech even at the longest throw distances.

The shielded drivers feature dual neodymium magnets to cut down the weight. Copper capped pole pieces lower the driver inductance and flux modulation, resulting in increased high frequency extension and reduced distortion at high drive levels. Butyl rubber surrounds provide long life even in high humidity environments.

Dynamic SonicGuard minimizes distortion at high drive levels by limiting low frequency excursion dynamically. This maximizes clarity at high drive levels while protecting the drivers from damage due to overpowering. A wall-mount bracket is included, plus ten M6 inserts on the back panel accommodate third-party mounting brackets, or can be utilized to suspend the speaker using forged shoulder steel eye bolts, providing installation versatility.

The CBT 100LA-1 Loudspeaker can be installed either indoors or outdoors. The drivers are weather-treated, and the fiberglass reinforced ABS cabinet is excellent for outdoor applications. The stainless steel external screws and the painted aluminum grille resist rusting in harsh conditions.

Constant Beamwidth Technology provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing
Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications
Switchable voicing provides flat response in music mode or mid-range presence peak in Speech mode
Dynamic SonicGuard overload protection
Wall bracket included
Built-in 70V / 100V transformer, plus 8 ohms direct capability

Frequency Range (-10 dB)

80 Hz – 20 kHz

Vertical Coverage

Vertical
Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
Broad Mode: 40° (1 kHz - 16 kHz) (±10°)
Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)

Sensitivity (2.83V@ 1m)

Narrow: (speech mode) 96 dB (2 kHz - 14 kHz )
(music mode) 93 dB (300 Hz - 18 kHz)
Broad: (speech mode) 93 dB (2 kHz - 14 kHz)
(music mode) 90 dB (300 Hz - 18 kHz)

Nominal Impedance

8 ohms (in Thru mode)

Power Capacity 
(8 ohm setting)

325 W (1300W peak), 2 hrs
200 W (800W peak), 100 hrs

Max SPL

Narrow: (speech mode) 121 dB cont ave (127 peak)
(music mode) 118 dB cont ave (124 peak)
Broad: (speech mode) 118 dB cont ave (124 peak)
(music mode) 115 dB cont ave (121 peak)

70V/100V Transformer Taps

120W, 60W, 30W (15W at 70V only), and 8Ω thru, via switch

Enclosure

Fiberglass reinforced ABS cabinet, painted aluminum grille

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors

Black or White (-WH)

Insert Points

18 M6 insert points on back panel.

Mounting

Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D)

1000 x 98.5 x 153
(39.4 in x 3.8 in x 6.0 in)

Similar Products

RM 7,XXX

JBL CBT 100LA LS Column Speaker

RM 2XX

Amperes CL908 Slim Line Colum...

RM 2XX

Emix WS 730 3x4 30W Column Speak...

RM 7XX

TOA TZ606W 60W Column Speaker Sys...

RM 3XX

TOA TZ206WWP 20W Column Speaker S...

RM 4,XXX

JBL CBT 50LA LS Column Speaker

See Also : Column Speaker, JBL
CONTACT US