Crown XLC2800 2x440W Power Amplifier

Crown XLC2800

Compact, powerful and cost-effective, the XLC Series provides ease of installation, outstanding sound quality and the unwavering reliability inherent in every Crown product. These amplifiers are powerful, affordable options for both the cinema and install markets.

Crown XLC2800 2x440W Power Amplifier

Some important features for cinema applications:

  • Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms
  • XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions
  • XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function
  • Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs
  • Support parallel connection of cinema surround speaker
  • Indicators provide accurate diagnostics: Power, Signal, Clip and Fault
  • Volume control on rear panel of amplifiers
  • High performance, light weight
  • DriveCore  based amplifier – weighs less than 14lbs (6 kgs)


Some important features for install applications:

  • Minimal front panel control; block connectors and controls on back of amplifiers
  • High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability
  • Configurable input operation for stereo and parallel and bridge modes
  • Configurable output operation for stereo and bridge modes

AC Line Voltage and Frequency Configurations Available(+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz
Voltage Gain42
Sensitivity1.4V (for full rated power at 4 ohms)
Signal to Noise Ratio(ref. rated power, 8 ohms, 1 kHz) > 103 dB
Damping Factor(8 ohms, 10 Hz to 400 Hz) >200
Intermodulation Distortion(from full rated output to -30 dB) <0.3%
Frequency Response (at 1W, 20 Hz - 20 kHz)-1 dB
Crosstalk>85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz)
Input Impedance (nominal)20 kilohms balanced, 10 kilohms unbalanced
Load Impedance2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
Dimensions19" x 3.5" x 10.4" (48.3cm x 8.9cm x 26.4cm)
Weight10.4 lbs (4.72 kg)
Shipping Weight13.2 lbs (6 kg)
IEC Power Connector15A

Similar Products

RM -

Crown CTS3000LITE Powered Ampli...

RM3,700.00 RM3,515.00

Peavey IPR2 2000 DSP 2x300W Cl...

RM4,270.00 RM3,630.00

Audio Center DA7.2 2x750...

RM880.00 RM800.00

Tach SS168B 12 Zones Speaker Sel...

RM1,750.00 RM1,500.00

Audio Center VA401 Power...


Wharfedale S2500 Power Amp...

See Also : Power Amplifier, Crown