Crown IT12000HD Rackmount Power Amplifier 2x2100W

Crown IT12000HD


The I-T12000HD from Crown Audio is a high-performance power amplifier designed for professional applications. The amplifier has a sleek rackmount enclosure packed with innovative technologies that provide world-class performance and ease-of-use. Patented Class-I circuitry provides efficient use of power to keep current draw low while still providing powerful audio output.



Crown IT12000HD Rackmount Power Amplifier 2x2100W

Onboard OmniDrive HD DSP processing is built-in and uses 24-bit/192kHz Cirrus Logic A/D and D/A converters, along with FIR and IIR filters for a high level of audio performance. A front-panel USB port allows you to easily transfer DSP settings from a computer to the amplifier. For connection to virtually any sound system, the amp sports analog and digital XLR inputs and outputs, as well as Speakon and Binding Post outputs. An Ethernet port supports TCP/IQ, HiQnet, and CobraNet, and is compatible with standard 100Mb Ethernet hardware.

The amplifier is kept cool by variable-speed fans with a front-to-back airflow to keep system components running reliably. Other useful features of the amplifier include Sweep Load Monitoring with system-level diagnostics, a bright LCD screen for easy navigation, and a true global power supply, allowing you to operate at full power no matter where you go.
 
Rackmount Design
The sleek rackmount chassis fits into any standard equipment rack for easy installation
Class-I Circuitry
Patented 5th-generation Class-I circuitry provides terrific efficiency for strong performance with a low power draw
OmniDrive HD DSP
Built-in BSS OmniDrive HD DSP processing and 24-bit/192kHz Cirrus Logic SHARC converters, along with FIR and IIR filters provide ultra-smooth performance
USB
A front-panel USB connector lets you connect a USB drive to quickly transfer DSP settings that were created in a computer
Analog and Digital I/O
The amplifier has analog XLR inputs and outputs, as well as AES/EBU digital XLR inputs and outputs. Speakon and Binding Post outputs are also provided
Ethernet
An Ethernet port supports TCP/IQ, HiQnet, and CobraNet, and is compatible with standard 100Mb Ethernet hardware
Cooling Fans
Front-to-rear cooling fans have true tachometer feedback for precision control of thermal performance
Diagnostics
Sweep Load Monitoring (SLM) technology provides system-level diagnostics
LCD Display
The bright LCD display allows you to quickly set up and monitor the amplifier
Global Power
The global power supply insures your ability to have peak performance anywhere in the world


Specifications

Power Rating 2100W/Channel (8 Ohm Dual)
4500W/Channel (4 Ohm Dual)
3750W/Channel (2 Ohm Dual)
9000W (8 Ohm Bridge)
7500W (4 Ohm Bridge)
Damping Factor > 5000
Input Sensitivity 1.4 - 7.75V (Adjustable)
Frequency Response 20Hz - 20kHz
Signal-to-Noise Ratio > 112dB
Total Harmonic Distortion (THD) < 0.1%
Input Connectors 2 x XLR Inputs
1 x AES/EBU Digital XLR Input
1 x USB Port
1 x Ethernet Port
1 x Power Input
Output Connectors 2 x XLR Outputs
1 x AES/EBU Digital XLR Output
2 x Speakon Outputs
2 x Binding Post Outputs (4 Posts Total)
Controls 1 x Power Switch
2 x Volume Knobs
Indicators LEDs for Bridge, Ready, Signal, Clip, Thermal, Fault, Network Data, Power, and AC Mains
Cooling Continuously Variable Speed Fans, Front-to-Back Airflow
Power Requirements 100-240VAC, 50/60Hz
Dimensions (WxHxD) 19 x 3.5 x 16.2" (483 x 89 x 411mm)
Weight 28 lbs (12.7kg)

Similar Products


RM6,174.02

Crown CDI1000 275W 2 Channels P...

RM -

Crown CTS3000 Powered Amplifier...

RM2,650.00 RM2,518.00

Peavey PV3 2x630W Power Ampli...

RM1,780.00 RM1,560.00

Alto MAC2.2 2x230W Power Amplifi...

RM -

Crown IT4X3500HDB 4 Channels Po...

RM -

Bose PowerMatch PM4250 Power Amp...

See Also : Power Amplifier, Crown
CONTACT US