Crown CTS3000BLU Powered Amplifier 2x1500W

Crown CTS3000BLU


Crown CTs 3000 Details Building on the foundation of the Com-Tech® Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.



  Crown CTS3000BLU Powered Amplifier 2x1500W

Crown CTs 3000
Features

  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • Crown Switching Power Supply for lighter weight
  • Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems┬Ě "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Comprehensive array of indicators provide accurate diagnostics
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.
Power Rating: 1250 Watts @ 8 Ohms, Dual (Per Channel)

Damping Factor: 10 Hz - 100 Hz:>3000

Input Sensitivity: Switchable:
1.4V(8/4 Ohms)
26 dB Gain:
2.46V(4 Ohm Load)
3.47V (8 Ohm Load)
1.4V(70V)

Input Impedance: 10 kOhms balanced(nominal), 5 kOhms unbalanced(nominal)

Gain: 50:1 (34 dB)

Frequency Response: 20 Hz - 20 kHz +/-0.25 dB @ 1 Watt

Signal-to-Noise Ratio: 105 dB A-Weighted, below rated power(20 Hz - 20 kHz)

Total Harmonic Distortion (THD): < 0.1%, at full rated power (20 Hz - 20 kHz)

Input Connections: 2 x Balanced 3-Pin Terminal Block Connectors(one per channel)

Output Connectors: 1 x 4-Pole Terminal Strip(Ch 1, Ch 2)

Controls Front Panel: 1 x Power Switch

Controls (Rear): 1 x Reset Switch
1 x Rotary Channel Level Control (per channel)
1 x 2-Position Operation Mode Switch
1 x Highpass Filter Switch (per channel)
1 x "Y" Input Switch
1 x Interior 3-Position Input Sensitivity Switch(per channel)

Indicators Front Panel:
1 x Yellow LED Bridge Mode Indicator
1 x Green LED Ready Indicator
3 x Green LED Signal Indicators(per channel)
1 x Red LED Clip Indicator(per channel)
1 x Red LED Thermal Indicator(per channel)
1 x Red LED Fault Indicator
1 x Yellow LED Data Indicator(per channel)
1 x Blue LED Power Indicator

Cooling : Continuously Variable Speed Fans

Ventilation: Grille (Front), Cooling Vents (Back)

Front-to-Rear forced airflow

Power Consumption: 24 Watts (120 VAC Mains)

Dimensions: 19 x 3.5 x 14.25" (483 x 89 x 362mm)

Weight: 27.7 lb (12.6 kg)

Similar Products

RM -

Crown XTi2002 2x800W 4ohm Power...


RM2,775.00

Yamaha PX5 Power Amplifier

RM -

Bose PowerMatch PM4250N Power Am...

RM880.00 RM800.00

Tach SS168B 12 Zones Speaker Sel...

RM -

Crown DCi2 300 2x300W DriveCore...

RM -

Crown CTS4200AUSPCN Powered Amp...

See Also : Power Amplifier, Crown
CONTACT US