Crown CTS2000 Powered Amplifier 2x1000W

Crown CTS2000

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design.

Sensitivity1.4 V
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted)105 dB
THD (full rated power, 20 Hz - 20 kHz)< 0.35%
Damping Factor (10 Hz to 100 Hz)<3000
Frequency Response (at 1W, 4/8 ohms)+/- 0.25 dB
Crosstalk (below rated power) 20 Hz to 1 kHz> 80 dB
Common Mode Rejection (20 Hz to 1 kHz)> 50 dB
Maximum Input Level before Compression+20dBu
Load Impedance70V, 100V (2-16 Ohms)
Voltage Gain (at maximum level settings) (8/4 ohm operation)35:1 (31 dB)
Power Draw at Idle (120VAC mains: standby mode)35W
Dimensions3.5" x 19" x 14.25"
Shipping Weight27.7 lbs

Similar Products

RM4,600.00 RM4,370.00

Peavey IPR2 3000 DSP 2x430W Cl...

RM -

Crown CT8150 Powered Amplifier ...


Behringer EP4000 Europower ...

RM1,750.00 RM1,500.00

Audio Center VA401 Power...

RM3,700.00 RM3,515.00

Peavey IPR2 2000 DSP 2x300W Cl...

RM1,800.00 RM1,710.00

Peavey PV900 2x180W Power Ampl...

See Also : Power Amplifier, Crown