Bose RoomMatch RM12010 10 Degree Vertical Array Loudspeaker -Black

Bose RoomMatch RM12010


Recommendation to retail theaters, houses of worship, auditoriums, performing arts venues and arenas.



Bose RoomMatch RM12010 10 Degree Vertical Array Loudspeaker 


Bose RoomMatch® DeltaQ™ array loudspeakers are designed for permanent installation in the finest performing arts centers, auditoriums, sports arenas, dance clubs and houses of worship, in which the large-format waveguides with choice of 42 coverage patterns can provide best-in-class coverage control, sound quality and vocal clarity even in venues with difficult acoustics.

Features

  • DeltaQ™ technology advances line-array loudspeaker design by allowing different “Q” (directivity) for each module in the array to improve sound quality by better matching array coverage to audience areas and distance, with improved phase coherency. 
  • 42 large-format waveguide patterns – allows designers to customize array coverage to exact venue dimensions to minimize wall reflections and deliver best-in-class sound quality even in venues with difficult acoustics
  • Continuous-Arc Diffraction-Slot (CADS) Manifold – provides smooth high-frequency array summation and allows choice of 5 vertical-coverage patterns. Select number of array modules based on sound level, low-frequency pattern control and budget requirements, independent of total array vertical coverage
  • Bose EMB2 compression drivers – deliver the vocal power normally associated with 3-way systems with frequencies from 500 Hz to 16 kHz projected from the large-format waveguides for remarkably consistent coverage and vocal clarity
  • Integrated Rigging – allows fast installation of arrays with up to 8 full-range modules at 10:1 safety factor
  • Available RMS215 or RMS218 subwoofers – extend full-range performance to 40 Hz or 25 Hz, in flown or ground stack arrays
  • Available Bose PowerMatch® amplifiers – configurable to provide optimal power for all RoomMatch modules and subwoofers; includes integrated loudspeaker DSP functions with optional Dante® digital audio network interface

Specification

Single Module Performance

Frequency Response (+/-3 dB)(1)

60 Hz - 16 kHz

Frequency Range (-10 dB)(1)

55 Hz - 16 kHz

Recommended High-Pass FIlter

50 Hz with minimum 24-dB / octave (4th order) slope

Nominal Coverage Pattern

55°, 70°, 90°, 120° horizontal (differs by module) x 5° vertical

Recommended Crossover

550 Hz (acoustic) requires active external DSP

 

Low Frequency

High-Frequence

Power Handling, long-term continuous(2)

500 W

150 W

Power Handling, peak

2000 W

600 W

 

 

RM5510

RM7010

 

RM9010

RM12010

Sensitivity (SPL / 1 W @ 1 m)(3)

94 dB

111 dB

110 dB

 

109 dB

107 dB

Calculated Maximum SPL @ 1 m(4)

121 dB

133 dB

132 dB

 

131 dB

129 dB

Calculated Maximum SPL @ 1 m, peak

127 dB

139 dB

138 dB

 

137 dB

135 dB

Transducers

Low Frequency

2 x Bose LF10 ultra-linear 10” woofers (3” voice coil)

High Frequency

6 x Bose EMB2 extended-mid-band compression driver (2” voice coil)

Nominal Impedance

4Ω + 8Ω (LF/HF)

Physical

Enclosure Material

Baltic birch plywood, engineered plastics, and steel frame

Finish

Two-part spray polyurethane coating on plywood, black

Grille

19-gauge (1 mm) perforated steel, powder-coated finish, black

Environmenta

Indoor use only

Connectors

2 x Neutrik NL4 wired parallel

Suspension / Mounting

Integrated side-plate rigging hardware; optional array frame accessories

Dimensions (H x W x D)

455 mm x 993 mm x 598 mm (17.9” 39.1” x 23.6”)

Net weight

55.8 kg (123 lbs)

Shipping Weight

81.6 kg (180 lbs)


Similar Products


RM5,810.00

Wharfedale WLA 28SUB Subwo...

RM -

Bose RoomMatch RM7010 10 Degree ...

RM -

Bose RoomMatch RM9040 40 Degree ...

RM -

Bose RoomMatch RM12010 10 Degree...

RM -

Bose RoomMatch RM9005 Symmetrica...

RM -

Bose RoomMatch RM7005 Symmetrica...

CONTACT US