Yamaha PX10 1000W Stereo Power Amplifier

YAMAHA PX10


RM4,171.10 RM4,390.00
*Price is inclusive of GST

You save 5%


Since the 1976 release of the P2200, our first professional power amplifier, we've strived to achieve the highest possible levels of sound quality, power output, and reliability in sound reinforcement, studio, and installed applications.

The new PX Series power amplifiers continue this tradition of excellence, utilising Yamaha’s renowned digital signal processing technology and unparalleled professional audio expertise to achieve a light, durable design, capable of delivering maximum output power to the speakers while simultaneously protecting them with optimized processing.

Driven by a newly-developed Class-D amplifier the four new models that make up the PX Series are suitable for a broad range of sound reinforcement and installation environments.


SPECIFICATION

Output power; 1kHz Non-clip 20msec Burst Both channels driven1000W x 2
1200W x 2
700W x 2

General specifications

Sampling frequency rateInternal48kHz
A/D D/A ConvertersAD/DA: 24-bit linear, 128 times over sampling
Total harmonic distortion0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
Frequency response±1.0dB (1W, 8Ω, 20Hz to 20kHz)
S/N ratio101dB (A-weighted, 8Ω, Gain setting = +14dBu)
CrosstalkLess than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)
Voltage Gain/Sensitivity8Ω Volume max32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
Maximum input voltage+24dBu
Input impedance20kΩ (Balance), 10kΩ (Unbalance)
I/O ConnectorsSpeaker output portsNeutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
Line InputXLR-3-31 x2, 1/4 "PHONE(TRS) x2
OthersUSB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp
IndicatorsPOWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
ProcessorsInput summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
Latency1.5 msec (Analog Input to Speakers)
Presets8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)
Protection circuitLoad protectionPOWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
Amplifier protectionThermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
Power supply protectionThermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown
Amplifier classClass D, Balanced output circuit (BTL)
Cooling16 step variable speed fan x 2, front to rear airflow
Power requirementsDepending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.
Power consumption310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling)
DimensionsW480mm (18-7/8")
H88mm (3-7/16"): 2U
D388mm (15-2/8")
Net weight7.4 kg (16.31 lbs)
AccessoriesUSB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1
OthersOperating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C