Shure MX392/C (Cardioid) Condenser Microflex Boundary Microphone

Shure MX392/C (Cardioid)


Low profile, professional boundary microphones with interchangeable cartridges. Built-in preamp.

RM1,238.00
*Price is inclusive of GST 0%



MX392 and MX393 Microflex® Wired Boundary Microphones from Shure are equipped with features like programmable, silent membrane switches, logic inputs and outputs, and green LED indicators. The high-quality solution for a range of applications such as altars, boardrooms and distance learning centers, Microflex Boundary microphones feature interchangeable condenser cartridges.

MX392: Surface-mount mic; LED logic input/switch logic output terminals, screw terminal connections, attached unterminated cable

Features
- Flat frequency response across the vocal range for uncolored sound
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Sleek, low-profile design for unobtrusive appearance
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Programmable membrane on/off switch plus LED on/off indicator
- LED logic input and switch logic output terminals for remote control or use with automatic mixers (MX392 models only)
- Cardioid pickup pattern for general sound reinforcement applications. Pickup angle (-3 dB) = 130┬░

Specifications
- Frequency Response: 
Cardioid (MX392/C, MX393/C)
Supercardioid (MX392/S, MX393/S)
Omnidirectional (MX392/O, MX393/O)
- lmpedance: EIA Rated at 150 ohms (180 ohms actual)
- Output Level: -6 dBV (0.5 V)
- Phantom power required?: 11 to 52 Vdc phantom, 2.0 mA current consumption
- Frequency Response: 50 Hz to 17 kHz
- Dynamic Range (Typical): 94 dB
- Signal-to-Noise Ratio: 71.0 dB
- Maximum Input Sound Level: 117 dB, (1 kHz at 1% Total Harmonic Distortion, 1 kW Load)
- Output Impedance: 150 Ohms (180 Ohms Actual)
- Output Connectors: Unterminated (Bare Wire)
- Pad: None
- Low Frequency Roll-Off: None
- Applications: Sound Reinforcement for Speech and Vocals Apply to Lectern, Pulpit, Stage Floor, Walls, Glass, etc.
- Dimensions: 4.263 x 3 x 1.621" (108.3 x 76.3 x 41.2 mm) LxWxH