Alto MIXPACK Express Ultraportable Powered PA System

Alto MIXPACK Express


RM1,912.24 RM2,011.88
*Price is inclusive of GST

You save 5%





The Alto MIXPACK Express is equipped with two 10" speakers and 350 watts of continuous power. The built-in mixer section features balanced XLR, balanced/unbalanced TRS and unbalanced RCA inputs. The MIXPACK Express speakers attach and detach to the amp/mixer module using firm, rugged latches, and the entire kit can be carried in one hand via a convenient, molded handle on top.

The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.

If you need a sold PA system that is loaded with features and easy to transport, the MIXPACK Express is a perfect solution. 

FEATURES

Lightweight and portable
Mixer, power amp and speakers built into one package
High quality digital effects
Wide variety of input options
Rugged and durable outer shell construction


Specification

Mixer Section
Microphone/Line Input: Electronically balanced, discrele input configuration
Frequency Response: 10Hz to 55kHz, +/-3 dBu
Microphone Input Impedance: 3.9 kÎ
Line Input Impedance: 10kÎ
Microphone Input S/N ratio: 94 dBu
Microphone Inputs: Balanced XLR connectors
Line Inputs: Balanced / Unbalanced, 1/4" (6.3 mm) TRS jack connectors
Tape Inputs: Unbalanced RCA jack
Inputs Distortion (THD & N): 0.04% at 0 dBu, 1kHz
Channel EQ High shelving: +/-15 dB @ 12kHz Low shelving +/-15 dB @ 80Hz
Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations
Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400Hz, 1 kHz, 2.5 kHz, 6.3kHz, 16kHz
Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack

Speaker Section
System Type 2-way coax vented box
Frequency Response 65Hz - 20 kHz at -10 dB
Spherical Horn Coverage 70 H — 70 V
Continuous Power 150 Watts AES Standard
Peak Power 300 Watts Peak
Protection Electronic circuit on driver
Speaker Specification 10" (254 mm) Low Frequency Driver / 2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High
Input Connectors 1/4" (6.3 mm) mono (TS) jack on each cabinet

Amplifier Section
Output Power 350 Watts (EIAJ)
Impedance 4Î
Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling