FBT Vertus CLA208SA 600W Processed Active Subwoofer




    • -For Live Stage, Theater, DJ Setups
    • -2x 8" Woofer
    • -50Hz to 180Hz Frequency Response
    • -Class D Power Amplifier
    • -Switch Mode Power Supply
    • -Combo XLR Jack In/Outs
    • -LED Status Indicators
    • -Birch Plywood Cabinet
    • -Ergonomic Integrated Carry Handles
    • -Includes AC Power Cable

The black Vertus CLA 208SA from FBT is a 600W RMS active subwoofer with two 8" custom neodymium woofers in a bass-reflex design. It can be used to extend the low frequency response to a wide range of FBT speaker systems for applications such as live stage, theater, houses of worship, DJ setups, and more.

The Vertus CLA 208SA has several other features such as a frequency response of 50 to 180 Hz and a 600W class D power amplifier that uses a switch mode power supply. It's built-in digital signal processor has 4 available frequency presets allowing the sub to be configured to any speaker.

The Vertus CLA 208SA 15 mm birch-plywood enclosure, which has an anti-scratch paint finish, features a control-panel that has stereo combo XLR/jack inputs, a link jack, an XLR Hi-pass stereo out jack, along with volume, preset settings, 0 to 180° phase switch, and status LED indicators on the rear panel. Also built into the enclosure are 2 integrated carry handles and a M20 stand adapter. Power is supplied using a Neutrik Powerconn input and link jack or the included AC power cable.

2x 8" custom neodymium high-excursion woofer with a 2" voice coil.
DSP processor with 4 available presets.
The built-in control panel has combo XLR/jacks with stereo input and link, XLR hi-pass stereo outputs, with volume control, preset settings, 0°-180° phase switch and status LEDs
Neutrik Powerconn input and link jack
Features a 15 mm birch plywood enclosure with anti-scratch paint finish that is also stackable
Built-in M20 stand adapter, 2 integrated handles, and front hardware to sustain CLA604A modules (sold separately)
Extruded-aluminum powder-coated cabinets. Superior latching system enables the extension of the length of the line array by adding CLA604A modules (sold separately) for increased modularity of the system
Amplifier Continuous RMS400
Max. Continuous Power RMS600
Amplifier Max Peak1200
Frequency Response50 Hz to 180 Hz
Low Frequency Driver2x 8" (203 mm) - 2" (51 mm) coil
High Frequency DriverNone
Maximum Sound Pressure Level (SPL)Continuous 125, peak 129 half-space
Input Impedance22 kOhms
Crossover Frequency0.15 kHz
AC Power Requirements450 VA
Input ConnectorsStereo XLR with loop, HP out
Power Cord16.4 " (5.0 m)
Dimensions (W x H x D)21.7 x 10.6 x 19.7" (550 x 270 x 500 mm)
Weight44.09 lb (20 kg)