JBL Control 52 Surface-Mount Satellite Speaker for Subwoofer-Satellite Loudspeaker System - Black/White (Pcs)

JBL Control 52


Surface-Mount Satellite Speaker for Subwoofer-Satellite 
Loudspeaker System
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex® former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.

FEATURES
  • Stylish, unobtrusive design fits into a wide variety of decors
  • Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
  • 16 ohms impedance
  • Wall-mount brackets included
  • Available in black or white

SPECIFICATIONS
Frequency Range (-10 dB)140 Hz – 20 kHz
Frequency Response (±3 dB)180 Hz – 17 kHz
Power Capacity50 Watts Continuous Program Power (2 hrs)
25 Watts Continuous Pink Noise (2 hrs)
30 Watts Continuous Program Power (100 hrs)
15 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity85 dB (4.0V/1m = 1W)
82 dB (2.83V, 1m)
Nominal Coverage Angle150° x 150° (omnidirectional)
Rated Maximum SPL (1m)94 dB average, 100 dB peak
Nominal Impedance16 ohms
Transducer Driver60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
Input ConnectorRemovable locking 2-pin connector with screw-down terminals. 
Max wire 12 AWG (2.5 mm2)
MaterialHigh impact polystyrene, painted zinc-plated metal grille.
Dimensions (H x W x D)Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)
Wall bracket: 51 mm (2.0 in)
Net Weight0.7 kg (1.5 lbs)
Shipping Weight0.8 kg (1.8 lbs)
Included AccessoriesWall bracket (both speaker and wall parts), 2-pin locking connector.