Mipro ACT 52/ACT 5T 19" Dual-Channel Diversity Receiver with 2pcs Bodypack Transmitter & Lavalier Mic

Mipro ACT 52/ACT 5T


RM4,240.00 RM5,088.00
*Price is inclusive of GST

You save 17%




ACT-52 Dual-Channel Diversity Receiver
  • EIA standard 1/2U rack-mountable metal chassis for personal use.
  • All controls are intuitive and easily operating via electronic buttons, preventing accidental operation.
  • Full-color VFD (vacuum fluorescent display) displays all pertinent parameters on the same screen. Automatic dim for stand-by and lit during performance.
  • Each receiver presets 6 groups, and each group presets 8 interference-free channels. A total of 48 preset channels per band.
  • World’s first ACT™ function provides precise and rapid frequency sync to the transmitters.
  • Advanced diversity receiving circuit for the best elimination of signal dropout and the “PiloTone & NoiseLock” dual-squelch circuits prevent noise interference.
  • Three switchable output levels. Output level is accurately pre-adjusted to equal to the microphone capsule sensitivity and ensures optimal performance
  • Receiver provides bias for booster where MIPRO antenna systems can be added for extended receiving range and stability
  • Stable performance, easy installation and more non-interference channels ideal for stage and PA applications.


SPECIFICATION

Channel

Dual

Chassis

EIA-Standard 19" 1/2U

Frequency Range

UHF 480~934MHz

Antenna

Rear Panel. Detachable.

Preset Frequency

48 selectable channels. 8 compatible channels in Group 1~6.

Receiving Mode

Diversity

Oscillation Mode

PLL Synthesized, Frequency Stability≦±0.005% (-10~+60℃)

Sensitivity

10dBμV, at S/N>80dB

S/N Ratio

>105dB(A)

T.H.D.

<0.5% @ 1kHz

Frequency Response

50Hz~18kHz

Squelch

"PiloTone & NoiseLock" dual-squelch circuit.

Audio Output Adjustment

Output level accurately pre-adjusted to equal to the microphone capsule sensitivity.

Maximum Output Level

3-level Switch: +10dBV / 0dBV / -6dBV

Power Supply

External 100-240V AC Switching Power Supply.

Dimensions

210(W)×44(H)×200(D)mm / 8.3(W)x1.7(H)x7.9(D)"

Weight

Approx. 0.9kg / 2.0lbs

Note

Refer to actual product in the event of product discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.



ACT-5T TRANSMITTER
1. FREQUENCY RANGE 620~950MHz 
2. FREQUENCY GENERATION Phase Locked Loop (PLL) technique 
3. SWITCHING BANDWIDTH 24 MHz 
4. CHANNEL GRID 25KHz
5. FREQUENCY STABLE ±0.005% 0℃~ +50℃
6. MODULATION FM 
7. RF OUTPUT POWER (50 OHMS LOAD) <30mW 
8. SPURIOUS EMISSION <4nW
9. NOMINAL DEVIATION ±40KHz
10. AUDIO FREQUENCY RANGE 80~18,000Hz
11. DISTORTION (AT 1KHZ AND NOMINAL DEV) <0.3% 
12. PRE-EMPHASIS 25uS 
13. BATTERY AA3(1.5V) ×2
14. CURRENT CONSUMPTION Approx. 80mA
15. OPERATION VOLTAGE 1.9V~3V
16. ANTENNA Internal (1/4 λ)
17. CONNECTORS 4 PIN SCREW TYPE MINIATURE 
18. DIMENSION (m/m) 105(L)×63(W)×21(H) 
19. WEIGHTS Approx. 95g
20. ENVIRONMENTAL Full SPECS -10 to 60 ℃