TOA A-1712 120W UK PA Powered Amplifier

TOA A-1712UK 120W


Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1712 PA amplifier of 120 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.

RM2,738.33
*Price is inclusive of GST





Specification

Power Source240 V AC, 50/60 Hz
Rated Output120 W
Power/Current Consumption258 W (rated output), 105 W (EN60065), under 320 mA (when power switch is OFF)
Frequency Response50 - 20,000 Hz (±3 dB)
DistortionUnder 2% at 1 kHz, rated power
InputMIC 1 - 6: -60 dB*, 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack
AUX 1 - 2: -20 dB*, 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack
(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 - 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack
AUX 5: -20 dB*, 10 kΩ, unbalanced,
combined type of XLR-3-31 equivalent and phone jack
PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack
(An equalizer or other signal processor connectable between LINE OUT
and PWR AMP IN terminals)
OutputREC: 0 dB*, 600 Ω, unbalanced, RCA pin jack
LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance (100 V line/83 Ω), individual selector key,
M4 screw terminal
DIRECT SPEAKER OUT: High impedance (100 V line/83 Ω), M4 screw terminal
Low impedance (4 - 16 Ω), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.)
Phantom PowerON or OFF for each MIC1 - 6 with switch setting
S/N Ratio (Band Pass : 20 - 20,000 Hz)Over 100 dB (Master volume: min)
Over 76 dB (Master volume: max)
Over 60 dB (MIC 1 - MIC 4)
Over 53 dB (MIC 5, MIC 6)
Over 76 dB (AUX 1 - AUX 5)
Tone ControlBass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control InputREMOTE VOLUME: M3 screw terminal
POWER REMOTE: No-voltage make contact input,
open voltage: 28 V DC (when the unit's power is OFF),
short-circuit: under 10 mA, M3 screw terminal
Indicator5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature-10℃ to +40℃
FinishPanel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions420 (W) × 107.7 (H) × 367 (D) mm
Weight12.6 kg
AccessoryPower cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
OptionRack mounting bracket: MB-25B
Volume control cover: YA-920
[Note] Distance between barriers on the above screw terminals: M3 … 7 mm, M4 … 9 mm